Carl Valentin FLEXICODE 53, Operating Manual

Page: 55 / 120

Flexicode Function Menu
11.19 Operating Manual 55
Press the key to move to the next menu item.
Indication of back speed of print mechanics after print end in mm/s.
Each cycle of the machine consists of printing and return to the zero
point of machine. The print speed and back speed can be set
separately. The setting range for the back speed is between 50 and
600 mm/s.
Because of this value you can select for low machine clock cycles an
operating method which saves the material and increases in this way
the life of the printhead.
Because of the mass moment of inertia it could be better to reduce the
speed at an installation position of the print unit at >30° horizontal.
Value range: 50
… 600 mm/s.
Press the key to move to the next menu item.
Indication of distance of the layout (res. the first layout in case more
layouts per cycles are to be printed) to the zero point of machine.
Value range: 0
… 999 mm
Default: 0 mm
Press the key to move to the next menu item.
Indication of start position of print carriage in mm.
Value range: 0
… 43 mm
Default: 3 mm
Press the key to move to the next menu item.
Indication of the number of printed layouts per print start (cycle).
Value range: 1
… 25.
Back speed
Print offset
Print position
Layouts/cycle