Carl Valentin FLEXICODE 53, Operating Manual

Page: 54 / 120

Function Menu Flexicode
54 Operating Manual 11.19
Press the key to move to the next menu item.
Encoder resolution / material feed per encoder rotation
Indication of resolution of used encoder and material feed per rotation
of encoder in mm. These settings help measuring the material speed.
The material feeding per encoder rotation corresponds for instance, in
a 1:1 translation between the encoder and the roller, to the roller
circumference.
Press the key to move to the next menu item.
Indication of material speed (only for reading purposes).
7.5 Machine Parameters (Intermittent Mode)
Switch on the control unit and the display shows the main menu.
Press the key to access the function menu.
Press the key until the menu Machine parameters is displayed.
Press the key to select the menu.
Selection of operating mode.
No. of pieces A print order with a defined number of pieces is
transferred. After the generating process the target
number and the actual number of pieces is shown in
the display. A cycle is started via signal input 1 or
with the key . With each cycle the actual
number of pieces is increased by the number of
printed layouts. In case the target number of pieces
is reached the print order is finished and the display
shows again the main menu.
Continuous A print order is transferred. After the generating
process the number of printed layouts is shown in
the display. A cycle is started via signal input 1 or
with the key . With each cycle the number of
printed layouts is increased. The print order is active
as long as it is terminated by the user or in case of
new data transmission.
Test mode This operating mode corresponds to mode 2. After
the return of the print unit to the zero point of the
machine, however, internally a further cycle is
started (endurance test).
Direct start A print order is transferred. After termination of
generating process the print order is executed
without an external signal.
Resolution
Material speed
Mode