Scanner DS457
Configuration
08.19
Operating Manual
13
4
Configuration
The scanner DS457 must be configured to operate on a printer
(Spectra, Spectra II, Vario III, Vita II). The corresponding PC software
123Scan²
can be download from the ZEBRA website
). After installing this software, the scanner must be
connected to the PC using the supplied USB cable (Zebra no 25-
58926-04R). If necessary, for the operation at the printer, remove the
RS 232 cable from the scanner.
In the main menu of
123Scan²
software can be selected if
•
a new configuration file for the scanner is to be created.
•
an existing configuration file is to be loaded and transferred to the
scanner.
•
the configuration of the attached scanner is to be loaded and
modified.
•
the firmware of the scanner is to be updated.
Figure 5
Summary of Contents for DS457
