CARIF 450 BA, Instruction Manual

Page: 21 / 40

21
450 BA
Parameter 1 - Language:
It allows to change language of CNC user interface.
To change language press till the desired language.
Parameter 2 - Carriage Ahead (angle cutting in automatic cycle):
It shows how far the carriage must stop before reaching zero on the mechanical shoulder,
avoiding that it could crash against the bow. It is calibrated in mm.
When this parameter is more than 0, CNC doesn’t perform carriage calibration.
By default it is planned as 0
Parameter 3 - Carriage Back:
It shows the stroke performed by the carriage. It is planned in mm.
By default it is planned as 610
1. Languages :
2. Carr. ahead
:
3. Carr. back :
4. Min. pcs L. :
5. Blade th. :
6. Edit mode :
7. Air Oil :
8. End material :
9. Blade stress :
4.8 Machine parameters
Pressing from MODE SELECTION screen, you enter the machine parameters screen:
MACHINE PARAMETERS
ITA
000
610
5.0
1.7
BASE
OFF
ON
ON
The arrow on display shows which parameter is selected.
To move the arrow use e
To confirm press