17
450 BA
Press
Adjust the “BOW FEED” lever of the hydraulic control in position between “A” and “D” and
the “CUTTING PRESSURE” regulator in position between “1” and “4”, then:
•
for NORMAL CUTTING CYCLE (with material on the machine) press
•
for MACHINE TEST (without bar on the machine) press
Answer to the following questions:
100
70
5
PROGRAM N. 001
Any other cut on the same
bar?
<START>Yes <STOP>No
PROGRAM N. 001
Insert diameter:
100
<ENTER>Confirm
PROGRAM N. 001
Blade speed m/min:
70
<ENTER>Confirm
PROGRAM N. 001
Flanging mm:
5.0
<ENTER>Confirm
PROGRAM N. 001
Selezione Materiale
1• Round 2• Rect.
3• Manual height reg.
1. Progr. In Execut.
2. Edit Program
3. Load Program
4. Cancel Program
1. Progr. 001 <START>
2. L: 100.0 DIA: 100
3. Pcs:
0000/0010
B:01
4. Blade sp.: 70 X: 0.0
LOAD PROGRAM
Program n. 001
<ENTER>Confirm
In this second case, on
display will appear the
following message:
Press and than
EMERGENCY!
Ended Material
<START>Continue Prg
<7>Program Test
to stop cycle.
Summary of Contents for 450 BA
Page 2: ...450 BA...
