22
450 BA
Parameter 4 - Minimum Piece Level:
It shows the minimum thickness to cut. It is planned in mm.
By default it is planned as 5.0
In case of length less than 5 mm, pay attention to avoid that piece remain locked between
blade and jaw.
Parameter 5 - Blade Thickness:
It shows the thickness of blade in use on the machine. It is calibrated in mm.
By default it is planned as 1.5 ( “CARIF 260 BA/CNC” and “CARIF 320 BA/CNC”)
By default it is planned as 1.7 ( “CARIF 450 BA/CNC”)
Parameter 6 – Edit mode:
It allows to activate an advanced programming mode for skilled users.
To change mode (BASE or ADVAN) press
By default it is planned as BASE
Parameter 7 – Air/Oil Lubrication:
It allows to activate or deactivate the Air/Oil lubrication control.
To modify parameter, press
By default it is planned as OFF
Parameter 8 - End Material:
It allows to activate or deactivate the end material micro-switch. This command is useful
when cutting thin material or tubes.
To modify parameter, press
By default it is planned as ON
Parameter 9 - Blade Stress:
It allows to activate or deactivate the blade stress control.
To modify parameter, press
By default it is planned as ON
Summary of Contents for 450 BA
Page 2: ...450 BA...
