20
450 BA
The “Alarm Threshold” shows the maximum stress allowed to the blade. If it’s overcome,
an alarm message is showed: “BLADE STRESS”. To restore allowed values, reduce feed by
“BOW FEED” lever and “CUTTING PRESSURE” regulator.
The “Actual Value” shows the blade stress just in time.
To go out of the screen press
4.6 Set of bars
4.7 Blade stress
Pressing
you can modify the number of bars loaded on the sawing machine,
before pressing
to start the AUTOMATIC cycle. So, the piece counter will
counting the number of bars to cut simultaneously:
During the cut, you can check the blade stress.
Press
. The following screen is appearing:
BARS GROUP
N.Bars: 00
<ENTER>Confirm
BLADE STRESS
Alarm thresh: 4.8A
Actual valur: 2.0A
<ESC>Exit
Insert the new number of bar and press
To go out of the screen without changing the programmed number of bars press
Summary of Contents for 450 BA
Page 2: ...450 BA...
