Carel uC2SE, User Manual

Page: 66 / 76

66
ENGLISH
μC 2 SE - +030220426 - rel. 2.1 - 09.06.2010
7.9 RS485 serial options
RS485 serial option for μC 2 SE panel version (code MCH2004850)
The MCH2004850 serial option is used to connect the μC 2 SE controller to a supervisor network via
a standard RS485 serial line.
This option uses the input normally associated with the programming key, which has the dual
function of key connector/serial communication port.
Fig. 7.k
7.10 Terminals
The μC2SE features the following user interfaces:
Remote terminal
The remote terminal allows the complete confi guration of the μC2SE from a remote position. The
buttons and indications on the display faithfully reproduce the μC2SE user interface. In addition,
PlantVisor can be connected to the remote terminal using the special accessory.
Product code:
MCH200TP00 for panel installation
MCH200TW00 for built-in assembly
For further information see the instruction sheet +050001065.
μAD
μAD is the μC2SE room terminal.
This terminal, fi tted with built-in temperature and humidity probes, controls the temperature-
humidity conditions in the environment where its is installed, interacting with the units controlled
by the μC2SE.
The μAD can be used to set time bands, the temperature and humidity set point, switch the
system on/off and change operating mode simply and intuitively.
Product code:
ADMA001000: with NTC probe
ADMB001010: with NTC probe, RTC and buzzer
ADMG001010: with NTC and humidity probe, RTC and buzzer
ADMH001010: with NTC and humidity probe, RTC, buzzer and backlighting
For further information see the instruction sheet +05000750 and the 030220465.
μAM
μAM is the μArea controller compatible with the μC2SE.
This can control up to 10 fan coils (fi tted with the e-droFAN electronic controller). By analysing the
temperature-humidity conditions in the diff erent rooms, μAM optimises the temperature of the
water produced by the chiller/HP, improving power consumption, performance and comfort.
In addition, the μAM centralises the data, such as set point, heat/cool mode and on/off for the
individual fan coil and the entire system, including time bands.
Product code:
ADEC001010: with NTC probe, RTC, buzzer and backlighting
ADEH001010: cwith NTC and humidity probe, RTC, buzzer and backlighting
For further information see the instruction sheet +050000740 and the 030220460.
Fig. 7.l
Fig. 7.m
Fig. 7.n