Carel PCOXS, User Manual, Page: 42 / 56

9. Schema generale dei collegamenti elettrici
Di seguito viene indicato un esempio (Figg. 9.1) di collegamenti elettrici
del pCO
XS
ai vari dispositivi.
AVVERTENZE:
• qualora i carichi pilotati siano alimentati a 24 Vac/Vdc è da prevedere
una alimentazione diversa da quella comunemente utilizzata per
l’alimentazione del pCO
XS ;
9. General diagram of the electrical connections
Below are one example (Figs. 9.1) of the electrical connections of the
pCO
XS to the various devices.
WARNINGS:
• if the loads controlled are powered at 24Vac/Vdc, if possible use a
different power supply from the one used for the pCO XS ;
42
pCO XS manual - cod. +030220345 - rel. 1.0 - 18.03.03
230/24 V
ac
M
OUT
+V
analog output 1 (0/10 Vdc) analog output 2 (0/10 Vdc) analog output 3 (PWM taglio di fase/
phase cutting
)
L
N
digital input 1 digital input 2 digital input 3 digital input 4 digital input 5 digital input 6
digital output 1 digital output 2 digital output 3 digital output 4 digital output 5
probe 3 (0/5
V)
probe 4 (Carel NTC)
probe 2 (4/20 mA)
probe 1
(0/1
Vdc o 4/20 mA)
G
G0
SYNC
B1 B2 B3 B4
GND
+5VREF +24VDC
Y1 Y2
Y3
GND
ID1 ID2 ID3 ID4 ID5 ID6
IDC1
RXTX- RXTX+ GND TLAN GND C1 NO1 NO2 NO3 C4 NO4 NO5 C5 NC5
J1
J5
J6
J7
J8 J9
J10 J11
J2 J3
J4
CLOCK CARD
SERIAL CARD
built-in terminal
xs
Fig. 9.1