Carel PCOXS, User Manual, Page: 33 / 56

5.5.2 Remotazione terminale fino a 200 m con rete pLAN con cavo
schermato AWG24 con 3 coppie r schermo
Questo tipo di remotazione è rappresentata in Fig. 5.5.2.1.
La Fig. 5.5.2.2 rappresenta il derivatore
TCONN6J000, utilizzato in coppia per la
remotazione del pCO
XS in rete pLAN con cavo
schermato AWG24.
cavo AWG24 (con alimentazione)
morsetto funzione cavo collegamenti
0 terra schermo
1 +VRL ( ≈ 30 Vdc) 1 o doppino A
2 GND 2
o
doppino A
3 Rx/Tx- 3
o
doppino A
4 Rx/Tx+ 3 o doppino B
5 GND 2 o doppino B
6 +VRL ( ≈ 30 Vdc) 1 o doppino B Tab. 5.5.2.1
5.5.2 Remote installation of the terminal at up to 200m in a pLAN
network using an AWG24 shielded cable with 3 twisted pairs +
screen
This type of remote installation is shown in Fig. 5.5.2.1.
Fig. 5.5.2.2 represents the shunt TCONN6J000,
used in a pair for the remote installation of the
pCO
XS in a pLAN network with an
AWG24shielded cable.
AWG24 cable (with power supply)
terminal wire function connections
0 earth shield
1 +VRL ( ≈ 30Vdc) 1st pair A
2 GND 2nd pair A
3 Rx/Tx- 3rd pair A
4 Rx/Tx+ 3rd pair B
5 GND 2nd pair B
6 +VRL ( ≈ 30Vdc) 1st pair B Table 5.5.2.1
33
pCO XS manual - cod. +030220345 - rel. 1.0 - 18.03.03
set prog.
enter
Terminal
on/off alarm enter
200 m
S90CONN
S90CONN
J3
CLOCK CARD
SERIAL CARD
built-in terminal
xs
Fig. 5.5.2.1
6 5 4 3 2 1 0
Fig. 5.5.2.2