8
ENG
“heaterSteam” +0300075EN - rel. 1.2 - 29.09.2015
W
X
Y
Z
..2*.. - ..13*..
..20*.. - ..40*..
X
Z
W
..53*.. - ..80*..
J
K
piano di foratura
drilling template
X
X
Y
Z
Y
Fig. 1.c
Seize mm (in)
UR002-13
UR020-40
UR053-80
X
220 (8.7)
445 (17.5)
286 (11.3)
Y
591 (23.3)
728 (28.7)
731 (28.8)
Z
82 (3.2)
22.5 (0.9)
137 (5.4)
W
-
400 (15.7)
416 (16.4)
J
-
-
235 (9.3)
K
-
-
201 (7.9)
Tab. 1.c
1.6 Removing the front panel
Models UR002…UR013:
1
2
3
4
5
Fig. 1.d
1.
turn the oval plate with the CAREL logo until the ground screw head
can be seen;
2.
loosen the screw with a screwdriver;
3.
grab the sides of the panel, lift it about 20 mm (0.79 in), and detach it
from the protruding edges of the humidifi er;
4.
remove the panel by pulling it forward;
5.
remove the protective fi lm.
Models UR020...UR080:
1
3
2
4
5
Fig. 1.e
1.
remove the screws on the top of the humidifi er using a screwdriver;
2.
grab the panel by lifting it from the top about 20 mm (0.79 in);
3.
remove the panel by pulling it forward;
4.
remove the protective fi lm (on all external surfaces of the humidifi er).
1.7 Mounting the front panel
Models UR002…UR013:
1
3
4
2
Fig. 1.f
1.
turn the red oval plate with the CAREL logo so that the fastening hole
below is visible;
2.
slide the panel on the frame (keeping it slightly raised and tilted) until
it stops on the rear edges;
3.
fasten the ground screw using a screwdriver, ensuring its tightening;
4.
turn the red oval plate with the CAREL logo so that the fastening hole
below is no longer visible;
Models UR020...UR080:
1
2
Fig. 1.g
1.
slide the panel on the base, keeping it slightly tilted;
2.
put it in vertical position and tighten the screws on the top cover
with a screwdriver.
Summary of Contents for heaterSteam UR Series
