CareFusion IVAC P6000, Technical & Service Manual

Page: 15 / 106

Configuration and Calibration
P7000, P6000, TIVA, TCI & TIVA 15/106 1000SM00012 Issue 8
Drug Setup (Mode
l
TCI & TIVA/Mode
l
TIVA)
1. Enter the access code
251
to display the
CONFIGURATION
menu.
2. Select
DRUG SETUP
using the
M
keys and press the
OK
softkey. The drug name list is displayed.
3. Select the drug name using the
M
keys and press the
OK
softkey. Alternatively, press
QUIT
to exit and return to
the
CONFIGURATION
menu.
4. To use a drug, it must be enabled by pressing the
YES
softkey at
ENABLE DRUG
. To return to the drug name list press
QUIT.
5. Step through each
DRUG SETUP
option (see table below) to setup or modify the drug name and protocol.

Press the OK softkey to confirm each option.

Press the
BACK
key at any time to go back to the previous option and make changes
DRUG SETUP option To adjust, use these keys...
DRUG NAME
To toggle through characters use single chevrons and
.
To go to first/last character use double chevrons and .
NEXT to go to next drug name letter.
CONCENTRATION UNITS
M
DEFAULT CONCENTRATION
M
MINIMUM CONCENTRATION
M or OFF
MAXIMUM CONCENTRATION
M
or OFF
Important: If the DEFAULT CONCENTRATION, the MINIMUM CONCENTRATION and the
MAXIMUM CONCENTRATION are equal, the TIVA mode start-up sequence will bypass the
CONCENTRATION option
DOSE UNITS
M then
OK
to select and continue.
INDUCTION DOSE
M
Note: If the setting is less than 0.01 the TIVA mode start-up sequence will bypass the
INDUCTION option
INDUCTION TIME
M
MAINTENANCE RATE
M
BOLUS DOSE
M
Note: If the setting is less than 0.01 the BOLUS setting is turned OFF. The Bolus feature is
disabled in TIVA mode.
6. At the
CONFIRM
option, review the drug setup data displayed then press the
OK
softkey to confirm. The
DRUG SETUP
menu is redisplayed.
Drug Setup (251)