1000DF00741 Issue 5
9/52
Alaris™ PK Plus Syringe Pump
Controls and Indicators
Controls and Indicators
Controls:
Symbol
Description
a
ON/OFF
button - Press once to switch the Pump on. Press and hold down for 3 seconds to switch the
Pump off.
Note:
Pump can only be switched off at specific stages of operation, see 'Power Down Sequence'
section in Configured Options for further details.
b
RUN
button - Press to start the infusion. The green LED will flash during infusion.
h
HOLD
button - Press to put the infusion on hold. The amber LED will be lit while on hold.
R
MUTE
button - Press to silence alarm for two minutes.
Note:
Callback alarm only:
– The two minutes silence can be configured using the Alaris PK Editor Software.
– when not in alarm press and hold until three audible beeps are sounded for 60 minutes
silence
i
PURGE/BOLUS
button - Press to access
PURGE
or
BOLUS
softkeys. Press and hold down softkey to
operate.
PURGE
the extension set during set up.
• Pump is on hold
• Extension set must not be connected to the patient
• Volume Infused (VI) is not added
BOLUS
- fluid or drug delivered at an accelerated rate.
• Pump is infusing
• Extension set is connected to the patient
• VI is added
d
OPTION
button - Press to access optional features, see 'Basic Features' section.
e
PRESSURE
button - Use this button to display the pumping pressure and alarm level.
f
CHEVRON
keys - Double or single for faster/slower increase or decrease of values shown on display.
g
BLANK SOFTKEYS
- Use in conjunction with the prompts shown on the display.
Indicators:
Symbol
Description
j
BATTERY
indicator - When illuminated the Pump is running on the internal battery. When flashing the
battery power is low with less than 30 minutes of use remaining.
S
AC POWER
indicator - When illuminated the Pump is connected to an AC Power Supply and the battery
is being charged.
