CARDIOSTRONG CST-BX90, Assembly And Operating Instructions Manual

Page: 15 / 44

R
L
706
110
109
BX 90
15
Step 6
࣑
ATTENTION:
Do NOT force the pedals into their
sockets, if they do not screw in easily you
may be trying to fit the wrong pedal or
you are rotating the pedal in the wrong
direction.
Thread the pedals onto the crank arms. The
pedals are marked with R and L at the screw.
Tighten the left pedal anti-clockwise and the
right pedal clockwise.
Step 7
L
NOTICE:
Make sure the HAT COVER [160] has already been slid into the HANDLE BAR POST [002] before
going to the following steps.
1. Hold the HANDLE BAR POST [002] in the correct position over the MAIN FRAME [001] and join
the RESISTANCE Console - CABLE [705] &
Console CABLE [706].
2. Carefully slide the HANDLE BAR POST
[002] into the MAIN FRAME [001] .
Take care not to damage the Console -
CABLE[705] & Console - CABLE [706].
3. Lift the HAT COVER [160] out of the way
and align the holes and fit 4 x BOLT [368]
then firmly tighten 4 x BOLT [368]. Slide
down the HAT COVER [160] and push
firmly.