CARDIOSTRONG CST-BX90, Assembly And Operating Instructions Manual

Page: 13 / 44

BX 90
13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Before assembling, first free up a sufficiently large work surface (approx. 2 x 2 m).
Step 1
1. Open the carton and lay it flat on the floor.
2. Remove all loose components.
3. Refer to the checklist and check that everything is
present.
L
NOTICE
To protect the BX90 while assembling we suggest that
you do not remove the Protective Packing Material
until it is absolutely necessary.
Step 2
1. Lift the rear of the machine off the floor
and slide a polystyrene block under
the rear-end remove packing material.
2. Undo 2 x BOLT and remove the
transportation tube.