background image

 

8528-M372-O1 Rev E 

 PZ3000 Series 

25

 

STATEMENT OF LIMITED WARRANTY 

 

Conditions Which Void Limited Warranty 

 

This warranty shall not apply to equipment which: 
A.) Has been tampered with, defaced, mishandled or have had 

repairs and modifications not authorized by Detecto. 

B.) Has had serial number altered, defaced, or removed. 
C.) Has not been grounded according to Detecto’s recommended 

procedure. 

 

Freight Carrier Damage 

 

Claims for equipment damaged in transit must be referred to the 
freight carrier in accordance with freight carrier regulations. 
 
This warranty sets forth the extent of our liability for breach of any 
warranty or deficiency in connection with the sale or use of the 
product. Detecto will not be liable for consequential damages of any 
nature, including but not limited to, loss of profit, delays or expenses, 
whether based on tort or contract. Detecto reserves the right to 
incorporate improvements in material and design without notice and 
is not obligated to incorporate improvements in equipment previously
manufactured. 
 
The foregoing is in lieu of all other warranties, express or implied 
including any warranty that extends beyond the description of the 
product including any warranty of merchantability or fitness for a 
particular purpose. This warranty covers only those Detecto products 
installed in the forty-eight (48) contiguous continental United States. 
 
 
 
 
 
 
 
 
 

Ph. (800) 641-2008 

E-mail: [email protected] 

203 E. Daugherty 

Webb City, MO 64870 

02/06 

Printed in USA 

D268-WARRANTY-DET 

 

Summary of Contents for Detecto PZ3000 Series





























Reviews: