8528-M372-O1 Rev E
PZ3000 Series
8
KEYPAD DESCRIPTION
The PZ3000 display is equipped with a membrane keypad containing 3 keys and the LITE-WAY
photo-eye sensor. The keypad is shown in detail in Figure 8.
DO NOT operate the keypad with pointed objects (pencils, pens, etc).
Damage to keypad resulting from this practice is NOT covered under warranty.
The following describes the use of each key.
Pressing this key will apply power to the instrument and turn on the scale. Note
that you must press and hold the key for approximately 2 seconds for the scale to
power up. If the scale is already on, pressing this key quickly will turn the scale off.
This key is also used to lock the weighing units. Refer to the “Operation” section of
this manual for instructions on locking the weighing units.
This key is used to select the units in which the weight is to be displayed. The
available units include pounds only, ounces only, pound-ounces with fraction,
kilograms, pound-ounces with decimal point and grams.
Pressing this key when the scale is on will zero the scale.
With the
LITE WAY
photo eye enable in setup (
Photo I = 1
or
2
), passing your
hand over the photo eye sensor will cause the scale to zero.
Photo Eye
Figure No. 8
Summary of Contents for Detecto PZ3000 Series
Page 2: ......
Page 19: ...8528 M372 O1 Rev E PZ3000 Series 17 PARTS IDENTIFICATION PZ3015 Base Assembly ...
Page 21: ...8528 M372 O1 Rev E PZ3000 Series 19 PARTS IDENTIFICATION PZ3015L PZ3030 Base Assembly ...
Page 23: ...8528 M372 O1 Rev E PZ3000 Series 21 PARTS IDENTIFICATION PZ3060 Base Assembly ...
