8528-M372-O1 Rev E
PZ3000 Series
12
SETUP AND CALIBRATION, CONT.
FLT=
(Digital Filter Level Selection)
Your scale will arrive with factory filter settings of 0 = Minimal (PZ3060 will be 2 = Heavy).
Please check with Tech Support before changing filter level, break range and sample rate.
Press ZERO key to show current setting. If value displayed is acceptable, press ZERO key
again to save it. Otherwise, use UNITS key to step through selections for a new value and
then press ZERO key to save it. Allowable values are:
0 = Minimal Filter
2 = Heavy Filter
1 = Moderate Filter 3 = Custom Filter
NOTE: If 3 = Custom Filtering is selected, three additional prompts will be displayed.
FLTLUL=
(Filter Level)
Press ZERO key to show current setting. If value displayed is acceptable, press ZERO key
again to save it. Otherwise, use UNITS key to step through selections for a new value and
then press ZERO key to save it. Allowable values are 1 (least amount of filtering) to 99
(greatest amount of filtering).
BR =
(Break Range)
Press ZERO key to show current setting. If value displayed is acceptable, press ZERO key
again to save it. Otherwise, use UNITS key to step through selections for a new value and
then press ZERO key to save it. Allowable values are 1 to 99 which correspond to the number
of division changes to break out of filtering.
SR=
(Sample Rate)
Press ZERO key to show current setting. If value displayed is acceptable, press ZERO key
again to save it. Otherwise, use UNITS key to step through selections for a new value and
then press ZERO key to save it. Allowable values are a minimum of 1 sample per second to a
maximum of 16 samples per second in one sample per second intervals.
UNITS=
(Weighing Units)
Press ZERO key to show current setting. If value displayed is acceptable, press ZERO key
again to save it. Otherwise, use UNITS key to step through selections for a new value and
then press ZERO key to save it. Allowable values are:
1 = Pounds Only
4 = Kilograms
2 = Ounces Only
5 = Pounds/Ounces with Decimal Point
3 = Pounds/Ounces with Fraction
6 = Grams
NOTE: If 3 = Pounds/Ounce with Fraction is selected, an additional prompt (
Fract=
) will
be displayed. In addition, the
int
(Interval Setting) and
dPP
(Decimal Point Position) will be
skipped.
FRACT=
(Fraction Interval)
Press ZERO key to show current setting. If value displayed is acceptable, press ZERO key
again to save it. Otherwise, use UNITS key to step through selections for a new value and
then press ZERO key to save it. Allowable values are:
0 = No Fraction
2 = 1/2
4 = 1/4
8 = 1/8
int=
(Interval Setting)
With the display showing
int=
, press the ZERO key to show the current setting. If the value
displayed is acceptable, press the ZERO key again to save it. Otherwise, use the UNITS key
to step through the selections for a new value. When the desired value is displayed, press the
ZERO key to save it. Allowable values are: 1, 2, or 5.
Summary of Contents for Detecto PZ3000 Series
Page 2: ......
Page 19: ...8528 M372 O1 Rev E PZ3000 Series 17 PARTS IDENTIFICATION PZ3015 Base Assembly ...
Page 21: ...8528 M372 O1 Rev E PZ3000 Series 19 PARTS IDENTIFICATION PZ3015L PZ3030 Base Assembly ...
Page 23: ...8528 M372 O1 Rev E PZ3000 Series 21 PARTS IDENTIFICATION PZ3060 Base Assembly ...
