7
Model Rated
Voltage
Rated
Current
Frequency /
Phase
Power
Module
Plug
Drawers/
250ml
Plasma
Bags
Approximate
Weight
Kg (lbs)
Exterior
Dimensions
(D x W x H)
12A
115 V
7.2 A
60 Hz/1
IEC C19
7 / 273
(39 per drawer)
162 (358)
79.0 x 61.9 x 185.4 cm
(31.1 x 24.0 x 73.0 in)
12D
208-230 V
3.6 A
60 Hz/1
23A
115 V
10.0 A
60 Hz/1
7 / 532
(76 per drawer)
209 (461)
96.2 x 71.1 x 199.4 cm
(37.9 x 28.0 x 78.5 in)
23D
208-230 V
7.4 A
50 Hz/60Hz/1
200 (440)
30A
115 V
10.0 A
60 Hz/1
7 / 665
(95 per drawer)
221 (488)
96.2 x 86.4 x 199.4 cm
(37.9 x 34.0 x 78.5 in)
30D
208-230 V
7.4 A
60 Hz/1
50A
115 V
16 A
60 Hz/1
14 / 1064
(76 per drawer)
332 (731)
96.2 x 143.5 x 199.4 cm
(37.9 x 56.5 x 78.5 in)
50D
208-230 V
9.6 A
60 Hz/1
6. Operating Environmental Conditions
The freezers described in this manual are classified for use as stationary equipment in a Pollution Degree 2 and
Overvoltage Category II environment.
These units are designed to operate under the following environmental conditions:
• Indoor use
• Altitude up to 2000 m (6512 ft)
• Maximum relative humidity 60% for temperatures from 15 to 32°C (59 to 90°F)
• Main supply voltage fluctuations not to exceed 10% of the nominal voltage
•
The freezer must not be connected to a GFCI (Ground Fault Circuit Interrupter) protected outlet as it may
be subject to nuisance tripping.
Operation outside of these conditions will affect the performance of the unit and the samples stored inside.
6.1 Unit Specifications
The last character in the model number listed on the freezer identifies the electrical specifications for your unit.
The dataplate is located on the upper left side of the unit.
Table 2. Unit Specifications
