11
3. Lift up the slide at the front. The slide is free to move from the front pilaster.
Figure 4. Front of slide Removal
4. The drawer slide must be removed from the rear pilaster at approximately a 45 degree angle
towards the center of the cabinet.
Figure 5. Slide Rotation
5. Pull the slide towards the front of the cabinet.
6. Determine desired location for the slide and insert the slide into the rear pilaster at a 45 degree angle
towards the center of the cabinet.
7. Once the slide is seated in the rear pilaster, rotate the slide until it is parallel with the unit wall and
insert slide into front pilaster.
Figure 6. Slide Installation
CAUTION:
Ensure the slide is level. If the slide is not seated in a level orientation, the drawers/baskets will not function
as intended. This could cause injury or product damage.
