Cardiac Science POWERHEART AED G3 9300A, Quick Reference Manual

Page: 27 / 32

Powerheart® AED G3 9300A and 9300E 70-02006-01 A 3-9
Step 7: Prepare the AED for the next rescue
Table 3-4: Compressions-only CPR
When the AED prompts… Do this ...
“Start CPR.” Perform CPR.
This cycle continues until the CPR time expires. At the end of CPR,
the AED prompts, “Stop CPR”. The AED returns to the ECG Analysis
Mode (see Step 4: Analyze the heart rhythm on page 3-6).
If the patient is conscious and breathing normally, leave the pads on the
patient’s chest connected to the AED. Make the patient as comfortable
as possible and wait for Emergency Medical Services (EMS) personnel
to arrive.
Step 7: Prepare the AED for the next rescue
After transferring the patient to EMS personnel, close the lid of AED.
Prepare the AED for the next rescue:
1.
Open the AED lid.
2.
(Optional) Retrieve the rescue data stored in the internal memory
of the AED. Use Rescuelink software installed on a PC (see the
Data Management chapter in the G3 Operator and Service
Manual).
3.
Connect a new pair of pads to the AED
(see Pad installation on page 2-9).
4.
Close the lid.
5.
Verify that the status indicator on the AED
handle is green.
0% 100%