Cardiac Science POWERHEART AED G3 9300A, Quick Reference Manual

Page: 23 / 32

Powerheart® AED G3 9300A and 9300E 70-02006-01 A 3-5
Step 3: Place pads
Step 3: Place pads on the patient
1.
Remove clothing from the patient’s chest.
2.
Ensure that the patient’s skin is clean and dry.
3.
Dry the patient’s chest and shave excessive hair if necessary.
When the AED
prompts… Do this ...
“Tear open package Keeping the pads connected to the AED, tear open the package.
and remove pads.”
Remove the pads from the package.
Leave the package attached to the pad wires.
“Peel one pad from With a firm, steady pull, peel one pad
the plastic liner.” away from the blue plastic liner.
It does not matter which pad to use
Note: Do not pull on the lead wires.
“Place one pad on Place the pad without the liner on the
bare upper chest.” bare upper chest as shown on the
package..
“Peel second pad 1. Pull the blue liner from the second
and place on bare pad.
lower chest as Note: Do not pull on the lead wires.
shown.”
2.
Place pad on the bare lower
chest as shown on the package.
Note:
Cardiac Science’s standard defibrillation pads are non-
polarized and can be placed in either position as shown on the pad
package.