![Capstan Turf Sprayer Edition SharpShooter With Rate Sync Operator And Maintenance Manual Download Page 40](http://html1.mh-extra.com/html/capstan/turf-sprayer-edition-sharpshooter-with-rate-sync/turf-sprayer-edition-sharpshooter-with-rate-sync_operator-and-maintenance-manual_2554691040.webp)
SharpShooter
®
with Rate Sync
®
- Turf Sprayer Edition
©2003, 2011, 2015 Capstan Ag Systems, Inc., All Rights Reserved | Version:
P-3.0
| 6/9/2016
5.0 - Control Features
38
Line 14 - Units
[Figure 42]
- The Units Menu consists of three choices
for the SSRS Display pressure units to be displayed in.
Range: US, SI
Line 15 - Pressure Sensor Menu
[Figure 43]
- PSI Sensor Menu consists of pressure
sensor specific parameters. Entering the Sensor PSI
offset and the Sensor volt min allows one to select
appropriate equipment settings. Sensor volt max,
sensor volt min and sensor PSI max are readouts for
diagnostic purposes.
Sensor Offset
[Figure 44]
- Manipulate this setting if a difference in
the pressure is noticed across separate pressure
sensors, such as between the SSRS Display pressure
reading and the rate controller pressure display from a
secondary pressure sensor.
Range: 10 to -10
Figure 42: Line 14 - Units
Figure 43: Line 15 - Pressure Sensor Menu
Figure 44: Sensor Offset
SharpShooter with Rate Sync system
requires a greater quality pressure
sensor relative to pressure sensors
which just report a screen value. So in
most cases the adjustment will be
correcting the value to the least
accurate sensor.