SharpShooter
®
with Rate Sync
®
- Turf Sprayer Edition
©2003, 2011, 2015 Capstan Ag Systems, Inc., All Rights Reserved | Version:
P-3.0
| 6/9/2016
3.0 - Parts Identification
16
3.6 - Valve Driver Module
[Figure 10]
- The
①
Valve Driver Module(s) are usually
located next to the Power Hub. Two are required. One
is for the BOOST row of nozzles and one is for the non-
boosted nozzles.
Each Valve Driver has a single connector that connects
to the Power Hub. Each Valve Driver is equipped with a
②
10A fuse.
3.7- Pressure Sensor
[Figure 11]
- On most models the Pressure Sensor is
located near the center section of the rear boom. On
SmithCo models the Pressure Sensor is located at the
machine center behind the seat.
The Pressure Sensor provides pressure signals to the
SSRS Display.
Figure 10: Valve Driver Module
Figure 11: Pressure Sensor
118400-020 replaces 118400-101.
The Pressure Sensor must be
installed in a vertical upright position.
It should be located so product flow
aways flows past it to avoid plugging.
It must also be installed at a location
that will allow an accurate reading
when all, or only one boom section, is
turned on.
118400-020
2
1
118400-101
1
2
116301-001
