SharpShooter
®
with Rate Sync
®
- Turf Sprayer Edition
©2003, 2011, 2015 Capstan Ag Systems, Inc., All Rights Reserved | Version:
P-3.0
| 6/9/2016
5.0 - Control Features
35
Line 7 - Rate Sync
[Figure 35]
- Rate Sync uses real time speed change
to determine the proper duty cycle for the appropriate
nozzle. It is used to make the SharpShooter with Rate
Sync system react faster to speed changes.
10hz is optimal, but Rate Sync Ave being selectable, a
receiver running 5hz can be used
Range: Off/Auto
Recommended Value = Auto
•
Rate Sync auto allows the SharpShooter with Rate
Sync system to correct the pressure quicker during
speed changes based on GPS data and
automatically calculating the max speed based on
tip size.
Line 8 - Rate Sync Ave
[Figure 36]
- Rate Sync Ave is the time parameter
used in rate sync calculations. Default setting of 0.1
second is recommended, higher settings cause rate
sync to react slower.
Range: 0.1 - 0.5
Figure 35: Line 7 - Rate Sync
Figure 36: Line 8 - Rate Sync Ave
Line 9 - Low Pressure Shutoff
A 10 Hz NMEA GPS connection and
VTG signal is required for Rate Sync to
operate properly.
If no 10 Hz NMEA GPS signal is
available, the Rate Sync Menu option
should be set to OFF.
Rate sync turned off disables speed
change corrections. GPS connection is
not needed with rate sync off.
