Caple pi650wh, Use And Installation Instructions

Page: 7 / 16

3LIOL1 7
EN
EN
USE INSTRUCTIONS
CONTROL PANEL (Fig.1)
- Light ON/OFF
- Switch on at th speed (maximum)
Speed reduction from th to 1st speed then
switch-off
- Display - shows the set speed (from 1 to )
- Switch on at 1st speed (minimum). Intake
increase from 1st to th speed, then switch-
off.
- Timer - Activation of the auto switch-off timer
(10 minutes).
Remote Control (Fig.1) optional
CLEANING AND MAINTENANCE
It is recommended to switch on the appliance
before cooking. It is also recommended to leave
the appliance in operation for 10 minutes after
cooking is terminated in order to completely
eliminate cooking vapours and odours.
The proper function of the cooker hood is
conditioned by the regularity of the maintenance
operations, in particular, the active carbon filter.
Clean the fan and other surfaces of the cooker hood
regularly using a cloth moistened with denatured
alcohol or non abrasive liquid detergent.
WARNING : unplug the appliance or switch
off the circuit breaker before carrying out
maintenance operations.
METAL ANTI-GREASE FILTERS
(Fig.4 M )
The metal anti-grease filters capture the grease
particles of the vapours that develop during cooking,
therefore they are subject to clogging according to
the frequency of the use of the appliance.
In order to prevent fire hazard, it is recommend -
able to clean the filter every 2 months by carrying
out the following instructions:
• Remove the filters from the cooker hood and
wash them in a solution of water and neutral
liquid detergent, leaving to soak.
• Rinse thoroughly with warm water and leave to
dry.
The filters may also be washed in a dishwasher.
The aluminium panels may alter in colour after
several washes. This is not cause for customer
complaint nor replacement of panels.
ACTIVATED CARBON FILTERS
(Fig.4
L
)
The activated carbon filters purify the kitchen
vapours, the air is then conveyed back into the
kitchen. The saturation of the active carbon filter
depends on the frequency of use of the appliance,
by the type of cooking and the regularity of cleaning
the anti-grease filters.
The filters are not washable nor re-useable and
must be replaced at maximum every four months.
To assemble the carbon filter it is necessary to:
- remove the metal anti-grease filters ( Fig.4
M
)
- rotate the 2 carbon filters to remove them (Fig.2)
LIGHTING
In order to change the mounted lamps:
- rotate the light unit anti-clockwise;
- remove the light unit;
- Replace the lamp with one that has the same fea-
tures because one with major power may cause
severe damage to the electrical system.
SAFETY INSTRUCTIONS
In certain circumstances electrical appliances
may be a danger hazard.
•
The hood has been designed to remove the
kitchen smells; any other additional use shall be
regarded as non-intended.
• Areate the room if other appliances that are not
supplied by electrical power are being used while
the hood is on.
• Do not leave the cooker on if it is not being used.
• Do not flambé food directly under the cooker
hood to prevent the grease filter catching fire due
to flames.
• Constantly check food frying to avoid that the
overheated oil may become a fire hazard.
• Do not check the status of the filters while the
cooker hood is operating.
• Do not touch the light bulbs after appliance use.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
T
he European Directive 00/96/EC on Waste
Electrical and Electronic Equipment (WEEE),
requires that old household electrical
appliances must not be disposed of in the
normal unsorted municipal waste stream. Old
appliances must be collected separately in
order to optimise the recovery and recycling of the materials
they contain and reduce the impact on human health and
the environment.
The crossed-out dustbin symbol on the product reminds
you of your obligation regarding separated waste collection.
Consumers should contact their local public service or their
local dealer for more information on the correct disposal of
exhausted household appliances.
THE MANUFACTURER DECLINES ALL
RESPONSIBILITY FOR EVENTUAL DAMAGES
CAUSED BY BREAKING THE ABOVE WARNINGS.
THE WARRANTY IS NOT VALID IN THE CASE OF
DAMAGE CAUSED BY FAILURE TO COMPLY WITH
THE ABOVE WARNINGS.