24
III)
Second step: new setup
1)
Take a ferromagnetic pot with a minimum diameter of 16 cm
2)
Select a cooking zone with the slider.
3)
Place the pot on the area to be set.
4)
Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now
configured.
5)
Follow the same procedure for each cooking zone with a [ C ] display.
6)
All the cooking zones are configured once all the displays are turned off.
Please use the same pot for the whole procedure.
Never put several pots together on the zones during the setup-process.
If [ E 4 ] displaying remains, please call Caple Service.
Troubleshooting:
The hob or the cooking zone does not start-up:
The hob is incorrectly connected to the electrical supply.
The protection fuse has cut-off.
The locking function is activated.
The touch controls are covered with grease or water.
An object is on a key.
The control panel displays [ U ]:
There is no pan on the cooking zone.
The pan is not compatible with induction.
The bottom diameter of the pan is too small.
The control panel displays [ E ]:
Disconnect and reconnect the hob.
Call Caple Service.
One or all cooking zones cut-off:
The safety system activated.
You forgot to switch-off the cooking zone for a long period of time.
One or more touch controls are covered.
The pan is empty and its bottom has overheated.
The hob also has an automatic reduction of power level and automatic overheating
protection
