Caple C749G Instruction Manual Download Page 5

Instruction manual C749G

Instruction manual C749G

Please keep this instruction manual for future reference

Please keep this instruction manual for future reference

8

9

ENVIRONMENTAL PROTECTION  

Waste electrical products should not be disposed of with household waste. Please 
recycle where facilities exist. Check with your Local Authority or retailer for recycling 
advice. This appliance is marked according to the European directive 2012/19/EU on 
Waste Electrical and Electronic Equipment (WEEE). 

By ensuring this product is disposed of correctly, you will help prevent potential 
negative consequences for the environment and human health, which could 
otherwise be caused by inappropriate waste handling of this product. The symbol 
on the product indicates that this product may not be treated as household waste. 
Instead it shall be handed over to the applicable collection point for the recycling of 
electrical and electronic equipment. Disposal must be carried out in accordance with 
local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this 
product, please contact your local council, your household waste disposal service  
or the retailer where you purchased the product.

CE DECLARATIONS OF CONFORMITY  

This appliance has been manufactured to the strictest standards and complies with 
all applicable legislation, Low Voltage Directive (LVD), Electromagnetic Compatibility 
(EMC) and the Gas Appliance Regulation (GAR).

WARRANTY 

Your new appliance is covered by warranty. The warranty card is enclosed - if it is 
missing, you must provide the following information to your retailer in order to 
receive a replacement: date of purchase, model and serial number. Registration can 
also be completed online by visiting 

www.caple.co.uk

.

Ensure you keep your warranty card safe, you may need to show it to Caple Service 
together with proof of purchase. 

If you fail to show your warranty card you will incur all repair charges.  
Spare parts are only available from Caple Service and spare parts authorised centres.

 

-

Insufficient ventilation produces a lack of oxygen.

 

-

In case of an intense or prolonged use of the equipment, 

it may be necessary to improve aeration, for example by 

opening a window or increasing the extraction power of 

your extractor hood, if it exists.

 

-

The products of combustion must be discharged outside 

through an extractor hood or an electric fan.

 

-

For any possible repair or modification, contact Caple 

Service directly for help, and ensure only original spare 

parts are used.

 

-

The rating label, with the serial number and model 

number included, is stuck on the underside of the hob.

Summary of Contents for C749G














Reviews: