Caple C749G Instruction Manual Download Page 3

Instruction manual C749G

Instruction manual C749G

Please keep this instruction manual for future reference

Please keep this instruction manual for future reference

4

5

CAUTION: 

 

-

Carefully read the instructions before installing and 

using the appliance. The manufacturer cannot be held 

responsible if improper installation or use of the device 

causes injury or damage. Keep the instructions handy as 

a reference for the future.

 

-

Do not use the hob during cleaning

 

-

Never leave the appliance unattended during food 

preparation because oil and grease could cause a fire.

 

-

When the unit is connected directly to the power supply, 

you need a switch insulating omnipolar. 

 

-

If the switched socket is not accessible after installation, 

or if the appliance is to be hard-wired, an additional 

means of disconnection must be provided for all poles. 

When switched off, there must be an all-pole contact 

gap of at least 3mm in the switch (including switch, 

fuses and relays). Connection data is shown on the data 

plate. It must match the mains electrical supply. After 

installation ensure that all electrical components are 

shielded and cannot be accessed by users.

 

-

The earth cable is not included.

 

-

If the power cable is damaged, it must be replaced by 

the manufacturer, by an authorised technician or by a 

qualified person to avoid danger.

WARNING:

 

-

This appliance is designed for cooking food and is 

intended for indoor domestic household use only.

 

-

The appliance and its accessible parts become hot  

during use. Care should be taken to avoid touching 

heating elements.

 

-

Children less than 8 years of age should be kept away 

unless continuously supervised.

 

-

Unattended cooking on a hob with fat or oil can 

be dangerous and may result in fire. 

NEVER

 try to 

extinguish a fire with water, but switch off the appliance 

and then cover flame e.g. with a lid or a fire blanket.

 

-

DANGER

 of 

FIRE

: do not store items on the  

cooking surfaces.

 

-

Don’t use a steam cleaner for cleaning the hob.

 

-

If the surface is cracked, switch off the appliance 

to avoid the possibility of electric shock.

 

-

DANGER

 of burning or scalding. Place pots and pans on 

the cooking zone in such a way that children cannot pull 

them down and burn themselves.

Summary of Contents for C749G














Reviews: