CANYON FURNITURE COMPANY.
A.- (1) HEADBOARD
B.- (4) SIDE RAILS
C.-(2) GUARD RAILS
D.- (24) 80MM FLAT HEAD BOLTS
E.- (24) 5/8" CROSS DOWEL NUTS
F.- (1) 5MM ALLEN WRENCH
G.- (4) SLATS
H.- (8) 1 1/4" SCREWS
I.- (1) LADDER
J.- (2) METAL HOOK BRACKETS
K.- (6) 1" SCREWS
L.- (1) TRUNDLE BED
1.- TO ASEMBLE TWIN OVER TWIN BUNK BED, USING TWO HEADBOARDS (A), FOUR SIDE RAILS (B), AND TWO GUARD RAILS (C).
2.- INSERT TWO CROSS DOWELS (E) IN ACCESS HOLE INSIDE THE SIDE RAIL&GUARD RAIL, ALIGN THE CROSS DOWEL NUT, MAKE SURE THE GROOVE IS HORIZONTAL, SEE FIG.6
3.- ATTACH TWO SIDE RAILS (B), AND TWO GUARD RAILS (C) ON TOP HEADBOARDS WITH THE GROVE LINES AS SHOWN IN FIG.7, INSERTING TWO 80MM FLAT HEAD BOLTS (D) INTO TOP HEADBOARD HOLES,USE 5MM
ALLEN WRENCH (F) TO TIGHTEN BOTH FLAT HEAD BOLTS
( DO NOT TIGHTEN COMPLETELY UNTIL ALL PIECES ARE CONNECTED TOGETHER )
SEE FIG.7, REPEAT THE SAME PROCESS AT ALL
FOUR CORNERS.
4.- TO ATTACH BOTTOM SIDE RAILS, USE THE SAME PROCESS AS SHOWN IN TOP SIDE RAILS, USING TWO SIDE RAILS TO HEADBOARD BOTTOM HOLES, SEE FIG.7
5.- PLACE FOUR SLATS (G) ON TOP & BOTTOM SIDE RAIL CLEATS, ONE SLAT IN BOTH HEADBOARD ENDS, PUSH THE SLATS AGAINST THE BED END POST (FIG. A) AND TWO SLATS IN THE MIDDLE AT EQUAL DISTANCE
FROM THE END SLATS, THEN EACH SLAT MUST BE FASTEN WITH ONE 1 1/4" SCREW (H), SEE FIG.8
( USE TWO 4 PCS SLAT PACK (98-645) AS SHOWN IN CONFIGURATION #1 )
6.- SLIDE TRUNDLE BED (L) UNDER BOTTOM SIDE RAILS,
AS SHOWN IN CONFIGURATION #1 )
HARDWARE PACK
(HPK00104)
4 PCS SLAT PACK BOX ( 98-645 ) FIG.3 ( 2 PCS )
HARDWARE PACK
(HPK00016)
LADDER BOX ( 98-720 ) FIG.4
TWIN BUNK BED ASSEMBLY
( USE TWO 4 PCS SLAT PACK 98-645 )
TRUNDLE BED STORAGE BOX ( 98-744 ) FIG.5
TWIN BUNK BED ASSEMBLY INSTRUCTIONS CONFIGURATION TYPE # 1
LIST OF CONTENTS
COTTAGE COLORS COLLECTION
BUNK BED END BOX ( 98-706 ) FIG.1 ( 2 PCS )
6 PCS SIDE RAILS BOX ( 98-730 ) FIG.2
HARDWARE PACK
(HPK00008)
A
FIG. 1
C
D
B
E
F
FIG. 2
G
H
K
FIG. 3
YES,
HORIZONTAL GROOVE
NO
FIG. 6
I
J
L
FIG. 4
FIG. 5
FIG. 7
FIG. 8
FIG. A
REV 01 02/08/16
PAGE 2 OF 5
KIS01130
Summary of Contents for 98-161
Page 12: ......
