Canyon 98-161 Assembly Instructions Manual Download Page 7 | Manualshive

Page: 7 / 14

Canyon 98-161 Assembly Instructions Manual Download Page 7

CANYON FURNITURE COMPANY.

READ ALL THE INSTRUCTIONS AND IDENTIFY ALL COMPONENTS AND CHOOSE YOUR CONFIGURATION AND BE SURE YOU HAVE ALL PARTS

TWO PEOPLE ARE NEEDED TO ASSEMBLE.

CONFIGURATION TYPE # 2

( 98-706 ) COTTAGE COLORS COLLECTION BUNK BED ASSEMBLY INSTRUCTIONS

THANK YOU FOR YOUR PURCHASE !

PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST

DO NOT COMPLETELY TIGHTEN ALL BOLTS UNTIL ALL COMPONENTS ARE CONNECTED.

CONFIGURATION TYPE # 1

98-706 BUNK BED END ( 2 PCS )
98-730 6 PCS SIDE RAILS
98-645 4 PCS SLAT PACK 3/3 ( 2 PCS )
98-720 LADDER

TO ASSEMBLE THIS BUNK BED REQUIRES

TWO PERSONS

WARNING:

THE BED SLATS WILL NO SUPPORT A

MATTRESS ALONE,A SLAT PACK OR A

BUNKIE BOARD IS REQUIRED FOR

PROPER SAFETY.

( NOT INCLUDED )

TOOLS NEEDED

PHILIPS HEADSCREWDRIVER (NOT INCLUDED)

5MM ALLEN WRENCH (INCLUDED)

98-706 BUNK BED END ( 2 PCS )
98-730 6 PCS SIDE RAILS
98-645 4 PCS SLAT PACK 3/3 ( 2 PCS )
98-720 LADDER

OPTIONAL

98-744 TRUNDLE BED

98-706 BUNK BED END
98-705 BUNK BED TOP END
98-208 6 DRAWER DRESSER
98-730 6 PCS SIDE RAILS
98-707 TWIN BED
98-645 4 PCS SLAT PACK 3/3 ( 2 PCS )
98-720 LADDER

98-706 BUNK BED END
98-705 BUNK BED TOP END
98-602 3 DRAWER COMPUTER DESK
98-730 6 PCS SIDE RAILS
98-645 4 PCS SLAT PACK 3/3 ( 2 PCS )
98-707 TWIN BED
98-720 LADDER

98-706 BUNK BED END
98-705 BUNK BED TOP END
98-208 6 DRAWER DRESSER
98-730 6 PCS SIDE RAILS
98-709 FULL BED
98-645 4 PCS SLAT PACK 3/3
98-646 4 PCS SLAT PACK 4/6
98-720 LADDER

98-706 BUNK BED END
98-705 BUNK BED TOP END
98-602 3 DRAWER COMPUTER DESK
98-730 6 PCS SIDE RAILS
98-709 FULL BED
98-645 4 PCS SLAT PACK 3/3
98-646 4 PCS SLAT PACK 4/6
98-720 LADDER

REV 01 02/08/16

PAGE 1 OF 5

KIS01130

«
...
5
6
7
8
9
...
»

Summary of Contents for 98-161















Reviews:

No comments