Canon WUX6010 User Manual Download Page 125

Page: 125 / 200

125

Menu Description

Advanced

Guid

Menu Description

Detailed settings

> [Network settings] >

[Detailed settings]

Display and manually change the IP address, gateway address, and other settings.
Available only when the network function is [On].

Menu

Function

IP address

IP address of the projector.

Gateway address

Gateway address of the projector.

MAC address

MAC address of the projector.

DHCP

TCP/IP settings

Change or specify the IP address, subnet mask, and gateway address
used for connections.

Option

Function

Off

Disables the DHCP function. TCP/IP settings must be
configured manually.

Enables the DHCP function. Searches the DHCP
server. There is no need to configure TCP/IP settings
(IP address, subnet mask, and gateway address),
because the IP address is acquired from the DHCP
server.

• This menu is not available (grayed out) when [DHCP] (

P125

)

is [On].

• If an invalid value is entered, the message “Invalid entry”

appears. If this occurs, enter a valid value.

Summary of Contents for WUX6010









































































































































































































Search results

Summary of Contents for WUX6010

Reviews:

Related manuals for WUX6010

Brands by name

Popular brands

Canon WUX6010, User Manual

Search results

Summary of Contents for WUX6010

Reviews:

Related manuals for WUX6010

Brands by name

Popular brands