Canon WUX6010 User Manual Download Page 131

Page: 131 / 200

131

Menu Description

Advanced

Guid

Menu Description

■

Mac OS X

Open the Apple Menu and select [System Preferences].

In the System Preferences window, click [Network] to display the Network
window.

Select [Built-in Ethernet] and click the [TCP/IP] tab. Make a note of the
original network settings (IP address, subnet mask, router, DNS server,
etc.).

Create a new network environment and set the IP address and subnet
mask.

The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.

Click [Apply] to close the network preference window.

■

Resetting the IP Address Setting of the Computer

Follow the same procedure as for changing the IP address and reset the values to
the original values based on the notes taken before the change.

Setting Up the Network

■

Displaying the Network Configuration Screen

Turn on the computer and projector.

Launch a web browser, enter “http://(projector IP address)” in the
address bar, and press the Enter key.

The projector web screen appears.

Network functions are not available for the first 40 seconds after projector startup.

Summary of Contents for WUX6010









































































































































































































Search results

Summary of Contents for WUX6010

Reviews:

Related manuals for WUX6010

Brands by name

Popular brands

Canon WUX6010, User Manual

Search results

Summary of Contents for WUX6010

Reviews:

Related manuals for WUX6010

Brands by name

Popular brands