manualshive.com logo in svg

Canon WUX6010, User Manual

The Canon WUX6010 is a high-performance projector designed to deliver exceptional image quality. For easy setup and optimal usage, make sure to download the free user manual from our website. This comprehensive manual provides in-depth instructions and troubleshooting tips to maximize your experience with the Canon WUX6010 projector.

Share
Download
background image

72

Convenient Features

This section describes features convenient during presentations and in other 
situations.

Temporarily Blacking Out an Image

Projection can be temporarily blanked after a presentation, or to divert the 
audience’s attention away from the screen.

Press the 

BLANK

 button to black out the image.

Press the 

BLANK

 button again to show the image.

• You can set the screen state while blacking out the image in the menu. 

(

P108

)

• The lamp remains illuminated while the image is blacked out.

Freezing the Picture

Projection can be temporarily frozen during computer operations that would be 
distracting, or to pause playback of video or animation.

Press the 

FREEZE

 button to freeze the moving image. The 

projector shows the following icon.
Press the 

FREEZE

 button again to return to the original display.

• It is also cancelled when the input signal is terminated.

Projecting Images Stored on a USB Flash Drive

Even without using a computer, you 
can project images stored on a USB 
flash drive simply by connecting it to 
the USB port.
For instructions on projection from a 
USB flash drive in the projector’s USB 
port, see “Projecting Images on a USB 
Flash Drive” (

P149

).

Remote control

Remote control

Screen

Summary of Contents for WUX6010









































































































































































































Reviews:

No comments

Related manuals for WUX6010

NEC WT615 Series User Manual preview
WT615 Series
Brand: NEC Pages: 159
NEC VT695 Quick Setup Manual preview
VT695
Brand: NEC Pages: 2
NEC U300X Series Specification preview
U300X Series
Brand: NEC Pages: 2
NEC NP510WS Series User Manual preview
NP510WS Series
Brand: NEC Pages: 8
BenQ MX613ST Product Service Manual preview
MX613ST
Brand: BenQ Pages: 124
Balt The Boss Assembly Instructions Manual preview
The Boss
Brand: Balt Pages: 8
DreamScreen 628-092 Series Installation Instructions Manual preview
628-092 Series
Brand: DreamScreen Pages: 11
FONESTAR PPEL-16106-FA Quick Start Manual preview
PPEL-16106-FA
Brand: FONESTAR Pages: 2
Tripp Lite isobar HT1210ISOCTR Specifications preview
isobar HT1210ISOCTR
Brand: Tripp Lite Pages: 4
Eiki LC-4300S Specification Sheet preview
LC-4300S
Brand: Eiki Pages: 1
InFocus IN124STA User Manual preview
IN124STA
Brand: InFocus Pages: 60
JAROLIFT ROLLO Original Instructions Manual preview
ROLLO
Brand: JAROLIFT Pages: 37
Hitachi CP-X2010N Specifications preview
CP-X2010N
Brand: Hitachi Pages: 2
Flycatcher smart sketcher User Manual preview
smart sketcher
Brand: Flycatcher Pages: 3
Philips Wall tap SPP2303WC Specifications preview
Wall tap SPP2303WC
Brand: Philips Pages: 2
Philips SPP7357WC Specifications preview
SPP7357WC
Brand: Philips Pages: 2
Philips Xtreme Surge Protector I Design-In Manual preview
Xtreme Surge Protector I
Brand: Philips Pages: 12
Philips Theatre Director SPP4200 Owner'S Manual & Warranty preview
Theatre Director SPP4200
Brand: Philips Pages: 12

Brands by name

Popular brands

Load more brands