manualshive.com logo in svg

Canon WUX6010, User Manual

The Canon WUX6010 is a high-performance projector designed to deliver exceptional image quality. For easy setup and optimal usage, make sure to download the free user manual from our website. This comprehensive manual provides in-depth instructions and troubleshooting tips to maximize your experience with the Canon WUX6010 projector.

Share
Download
background image

127

Menu Description

Advanced

 Guid

e

Menu Description

PJLink

> [Network settings] >

 [PJLink] 

 

You can enable or disable the PJLink network function of the projector.
When this function is enabled, control is possible over a network using PJLink 
commands.

Option

Function

Off

Disables the PJLink function.

On

Enables the PJLink function.

• The projector conforms to Class 1 as defined in PJLink standards established by the 

Japan Business Machine and Information System Industries Association (JBMIA). This 
projector supports all commands that are defined by PJLink Class 1, and has been 
verified as conforming to the PJLink standard Class 1 definition.

• For details on using PJLink, see “Setting PJLink [PJLink]” (

P142

).

What is PJLink?

In September 2003, the PJLink Working Group was established under the Data Projector 
Committee. During the first year, this PJLink Working Group standardized PJLink as a new 
interface specification for projectors.
PJLink is a unified standard for operation and control of projectors.

It allows centralized control of projectors and operation from a controller for all projectors 
regardless of manufacturer.
The objective is for JBMIA to improve convenience for users and expand the use of 
projectors through early systemization for network monitoring and control of projectors, 
which will become the mainstream in the future.

Class 1: Standardization of control and monitoring specifications for basic projector 
functions
Basic projector control: Power control, input selection, etc.
Acquisition of projector information and status: Power status, input selection status, error 
status, lamp use time, etc.

JBMIA: Japan Business Machine and Information System Industries Association.

The JBMIA is an organization which was launched in 1960 and changed its name 
on April 1, 2002.

PJLink website: http://pjlink.jbmia.or.jp/english/

PJLink is a registered trademark of JBMIA and pending trademark in some countries.
PJLink is a registered trademark, or an application has been submitted for trademark, in Japan, 
the United States and / or other countries or regions.

Summary of Contents for WUX6010









































































































































































































Reviews:

No comments

Related manuals for WUX6010

Optoma DS322 Datasheet preview
DS322
Brand: Optoma Pages: 1
Taiden TES-5600 Installation And Operating Manual preview
TES-5600
Brand: Taiden Pages: 71
ViewSonic PJ503D-1 Service Manual preview
PJ503D-1
Brand: ViewSonic Pages: 144
CyberPower P4WSU User Manual preview
P4WSU
Brand: CyberPower Pages: 2
Emos LGEU-1 Instruction Manual preview
LGEU-1
Brand: Emos Pages: 16
SCREENLINE Amleto Instructions preview
Amleto
Brand: SCREENLINE Pages: 2
Patton electronics 570-R8 User Manual preview
570-R8
Brand: Patton electronics Pages: 7
Christie CineLife+ CP4425-RGB Replacing preview
CineLife+ CP4425-RGB
Brand: Christie Pages: 7
Tripp Lite TLP51F Specification Sheet preview
TLP51F
Brand: Tripp Lite Pages: 2
Digital Projection TITAN 1080p-600 Important Information Manual preview
TITAN 1080p-600
Brand: Digital Projection Pages: 44
Verano Ritzscreen V540 Installation Manual preview
Ritzscreen V540
Brand: Verano Pages: 12
NEC NP02LM1 Important Information Manual preview
NP02LM1
Brand: NEC Pages: 82
Barco R9002041 Installation Manual preview
R9002041
Brand: Barco Pages: 33
Panasonic PT-EW530 Manual preview
PT-EW530
Brand: Panasonic Pages: 17
Sanyo PLC-XU100 Specifications preview
PLC-XU100
Brand: Sanyo Pages: 1
Sanyo PLC-XP55 Specifications preview
PLC-XP55
Brand: Sanyo Pages: 1
Sanyo PLC-XP57L Specifications preview
PLC-XP57L
Brand: Sanyo Pages: 2
Sanyo PLC-XP51 Specifications preview
PLC-XP51
Brand: Sanyo Pages: 1

Brands by name

Popular brands

Load more brands