Canon WUX6000, User Commands, Page: 85 / 96

WUX6000 User Commands
-82-
SHARP
Sharpness setting
Format
Setting Command SHARP=<Sharpness setting:Number>
Response i:OK
Reference Command GET=SHARP
Response g:SHARP=<Sharpness setting:Number>
Note: See "Error list" for any response other than the above.
Setting values for <Sharpness setting:Number> are -10 to 10.
Environment
Power mode restriction Input
LAN RS-232C
SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI LAN USB None
No No No No Yes No No Yes Yes Yes Yes Yes Yes Yes Yes
Remarks
(1) This sets the currently selected input signal and image mode.
Example
(Setting)
>SHARP=3
< i:OK
(Reference)
> GET=SHARP
< g:SHARP=3
Note: '>' indicates a command; '<' indicates a response.