Canon WUX6000, User Commands, Page: 83 / 96

WUX6000 User Commands
-80-
SAVEIMGPROF
User memory creation/storage/deletion
Format
Setting Command SAVEIMGPROF=<User memory save to parameter:ID>
Response i:OK
Reference Command GET=SAVEIMGPROF
Response g:SAVEIMGPROF=<Number of user memories>:<User 1 present
parameter>,<User 2 present parameter>,<User 3 present
parameter>,<User 4 present parameter>,<User 5 present parameter>'
Note: See "Error list" for any response other than the above.
< User memory save to parameter:ID >
Parameter Meaning
USER_1 Save to User 1
USER_2 Save to User 2
USER_3 Save to User 3
USER_4 Save to User 4
USER_5 Save to User 5
DEL_ALL Delete all User memory
< User memory presence parameter:ID >
Parameter Meaning
0 User memory not created
1 User memory created
Environment
Power mode restriction Input
LAN RS-232C
SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI LAN USB None
No No No No Yes No No Yes Yes Yes Yes Yes Yes Yes Yes
Example
(Setting)
>SAVEIMGPROF=USER_2
< i:OK
(Reference)
> GET=SAVEIMGPROF
< g:SAVEIMGPROF=5:1,0,1,0,0
Note: '>' indicates a command; '<' indicates a response.