WUX6000
User Commands
-41-
DZOOM_POS
Zoom display position
Format
Setting
Command
DZOOM_POS=<DZOOM position No:Number>,
<DZOOM position Y:Number>
Response i:OK
Reference
Command GET=
DZOOM_POS
Response
g:DZOOM_POS=<DZOOM position No:Number>,
<DZOOM position Y:Number>
Note: See "Error list" for any response other than the above.
<DZOOM position No / Y:Number> is a signed integer indicating the central position of the enlarged
input image.
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
PM
ON
ST
PM
ON
D-RGB
A-RGB
COMP
HDMI
LAN
USB
None
No
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Remarks
(1) This command is identical to pressing the arrow keys to move while DZOOM is enabled,
however, the position can be specified in more detail.
(2) If a position outside the range is specified, the position is automatically moved to the nearest
position within the range.
(3) 0 for <DZOOM position No / Y:Number> indicates the center position of the input image.
(4) Positive direction for <DZOOM position No / Y:Number> corresponds to RIGHT and UP keys,
and negative direction corresponds to LEFT and DOWN keys.
(5) The numerical value for <DZOOM position No / Y:Number> represents units in pixels of the
input image.
* For example, in a case where an input image of XGA (1024 x 768) size is enlarged twice the
size (range of 512 x 384 is displayed), up to ±256 for <DZOOM position No:Number>, and up
to ±192 for <DZOOM position Y:Number> can be specified.
Example
(Control)
> DZOOM_POS=100,200
< i:OK
(Reference)
> GET=DZOOM_POS
< g:DZOOM_POS=100,200
Note: '>' indicates a command; '<' indicates a response.