WUX6000
User Commands
-72-
POWER
Power supply control
Format
Setting
Command
POWER=<power control parameter:ID>
Response i:OK
Reference
Command GET=
POWER
Response
g: POWER = < Power mode parameter:ID >
Note: See "Error list" for any response other than the above.
< Power control parameter:ID >
Parameter
Meaning
ON Power
ON
OFF Power
OFF
< Power mode parameter:ID >
Parameter
Meaning
OFF Power
OFF
OFF2ON
OFF -> ON in transition
ON Power
ON
ON2OFF
ON -> OFF in transition
PMM
Lamp OFF
PMM2ON
Lamp OFF -> ON in transition
ON2OFF
ON -> OFF in transition
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
PM
ON
ST
PM
ON
D-RGB
A-RGB
COMP
HDMI
LAN
USB
None
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Remarks
(1) Lamp Replacement Preparation, "Lamp Replacement Warning," and ""Air Filter Cleaning
Warning" are displayed for 10 seconds, regardless of whether the projector was started by the
button or command.
(2) Note that there are different parameters for the setting command and the reference
command.
Example
(Control)
>POWER=ON
<i:OK
(Reference)
>GET=POWER
< g:POWER=OFF
Note: '>' indicates a command; '<' indicates a response.