Canon WUX6000, User Commands, Page: 45 / 96

WUX6000 User Commands
-42-
DZOOM_RAT
Zoom display ratio
Format
Setting Command DZOOM_RAT=<DZOOM ratio parameter:ID>
Response i:OK
Reference Command GET=DZOOM_RAT
Response g: DZOOM_RAT=<DZOOM ratio parameter:ID>
Note: See "Error list" for any response other than the above.
< DZOOM ratio parameter:ID >
Parameter Meaning
1 same size (DZOOM disabled)
1.5 1.5x
2 2x
3 3x
4 4x
5 5x
6 6x
8 8x
10 10x
12 12x
Environment
Power mode restriction Input
LAN RS-232C
SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI LAN USB None
No No No No Yes No No Yes Yes Yes Yes Yes Yes Yes No
Remarks
(1) If DZOOM is disabled and the zoom ratio is set to a value other than "1", DZOOM is enabled,
and the ratio is displayed in the lower right of the screen.
(2) If DZOOM is enabled and the zoom ratio is set to "1", DZOOM is disabled, and the ratio
disappears from the lower right of the screen.
Example
(Control)
> DZOOM_RAT=12
< i:OK
(Reference)
> GET=DZOOM_RAT
< g:DZOOM_RAT=12
Note: '>' indicates a command; '<' indicates a response.