WUX6000
User Commands
-45-
FINE_GAMMA_G
Fine gamma (G) adjustment
Format
Setting
Command
FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment
value:Number>,<Fine gamma (G) adjustment point 2 adjustment
value:Number>,
・・・
,<Fine gamma (G) adjustment point n
adjustment value:Number>
Response i:OK
Reference
Command GET=FINE_GAMMA_G
Response
g: FINE_GAMMA_G=<Fine gamma (G) adjustment point 1 adjustment
value:Number>,<Fine gamma (G) adjustment point 2 adjustment
value:Number>,
・・・
,<Fine gamma (G) adjustment point n
adjustment value:Number>
Note: See "Error list" for any response other than the above.
Adjustment values for
<
Fine gamma (R) adjustment point n adjustment value:Number> are 0 to 1024.
Environment
Power mode restriction
Input
LAN
RS-232C
SL0
SL1
SL3
PM
ON
ST
PM
ON
D-RGB
A-RGB
COMP
HDMI
LAN
USB
None
No
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Remarks
(1) This sets the currently selected input signal and image mode.
(2) In the projector menu, the difference between adjustment point 1 and adjustment point 9 is
controlled so that it is 128 or greater, but this limitation does not apply to settings specified
from user commands.
Example
(Setting)
> FINE_GAMMA_G=0,128,256,384,512,640,768,896,1024
< i:OK
(Reference)
> GET=FINE_GAMMA_G
< g:FINE_GAMMA_G=9:0,128,256,384,512,640,768,896,1024
Note: '>' indicates a command; '<' indicates a response.