Emergency Startup Mode
4-12
Appe
ndix
4
Emergency Startup Mode
The product normally communicates with the Infrastructure Mode. However, if the
firmware update is not completed successfully, due to a reason such as the power
turning off during the update, it starts in its emergency startup mode.
The Wireless LAN Board displays the following characteristics when in the
emergency startup mode. Refer to "Updating the Firmware," on p. 4-9, to update
the firmware again.
■
Control Panel of the Machine
A [!] is displayed to the left of the displayed wireless LAN settings.
■
LED Indicators
The ERR2 indicator flashes five times.
■
SSID
Fixed to 'NB-W1_<last 6 digits of MAC address>'.
■
Encryption and Authentication Method
Fixed to WEP.
Summary of Contents for Wireless LAN Board-B2
