Canon Wireless LAN Board-B2, User Manual

Page: 61 / 100

Enabling the Settings 2-31
Usin
g th
e Wire
less LAN Boar
d in a Net
w
o
rk
2
Enabling the Settings
This section describes the procedure for enabling the settings of the Wireless LAN
Board using the control panel of the machine.
The changed settings are saved to the Wireless LAN Board after the consistency of
the following settings has been checked. If the settings are found to be inconsistent,
an error message is displayed. In this case, refer to "Troubleshooting for Specifying
and Saving Network Settings," on p. 3-2 to change the settings to their correct
values.
1
Press [Save Parameter] on the Extension Card Settings
screen.
Encryption and
Authentication Method
Content Checked Reference
802.1X/EAP+WEP Checks whether a root CA
certificate and user name are set. If
[TLS (WLAN Card Certificate)] is
selected in [EAP Type], checks
whether a wireless LAN card
certificate and private key are set.
802.1X/EAP Settings:
p. 2-20
WPA/WPA2+802.1X/EAP
WPA/WPA2-PSK Checks whether PSK is set in
either
[PSK ASCII (8-63 characters)] or
[PSK Hex (64 digits)].
WPA/WPA2-PSK Settings:
p. 2-27
WEP Checks whether a WEP key is set
in the index selected by pressing
[Select WEP Key].
WEP Settings: p. 2-28