Canon Wireless LAN Board-B2, User Manual

Page: 58 / 100

Security Settings 2-28
Usin
g th
e Wire
less LAN Boar
d in a Net
w
o
rk
2
●
If you want to enter the PSK using a hexadecimal number:
❑
Press [PSK Hex (64 digits)]
➞
enter the PSK as a hexadecimal number.
Enter the PSK as a 64 digit number using "0" to "9," "A" to "F," and "a" to "f."
WEP Settings
This section describes the settings required if you selected WEP as the encryption
and authentication method in "Selecting the Encryption and Authentication
Method," on p. 2-10.
NOTE
You can confirm the WEP key length displayed in [WEP Key Length] on the
WEP Settings screen.
- 40bit WEP Key: displayed when a 10 digit WEP key is set.
- 104bit WEP Key: displayed when a 26 digit WEP key is set.
1
Press [WEP Settings] on the Extension Card Settings screen.
2
Press [802.11 Authentication]
➞
select the 802.11
authentication method of the access point you want to
connect to.