Canon VC-C50i, Instruction Manual

Page: 52 / 246

Before You Use the Product
14
Using the Wide-angle Converter
The optional Wide-angle Converter WL-37 can be used to provide wide-angle shots (approx.
0.74
×
the normal focal distance).
Mount the wide-angle converter correctly so that it is level and fitted securely onto the
camera. When mounted correctly, the wide-angle converter should turn roughly 3 times before
stopping.
Connecting the Components
Wide-angle Converter
The Wide-angle Converter WL-37 cannot be used on the VC-C50iR. If the converter
is used on the VC-C50iR, the mount will gradually loosen and the converter will fall off
the camera.
a
WARNING
●
The camera may not operate correctly if a wide-angle converter other than
the WL-37 is used.
●
If you use the optional Wide-angle Converter WL-37, set the zoom lens to the
wide-angle end. If you set the zoom lens to the telephoto end, the image
resolution will be affected and the autofocus might have problems.
●
The permissible range of camera installation angles with the wide-angle
converter mounted on the camera is
±
15
°
from the horizontal.
●
The wide-angle converter cannot be used in night mode. (
→
P.33)
NOTE
VIDEO OUT A1
B1
A10
B10
DC IN 13V
To VIDEO IN terminal
Monitor
AC cable
Multiconnector plug
BNC connector
AC Adapter
(Rear of camera)
• PC
• Another
VC-C50i/
VC-C50iR
• Network
camera server
• Sensor
• Alarm
• Monitor