Canon VB-R13VE Operation Manual Download Page 66

Page: 66 / 263

Set a capture mode suited to the brightness of the camera installation environment (P. 73).

(J)

Clear IR Mode

Selects whether to enable/disable the clear IR mode that reduces shade and heat shimmer in far

backgrounds (P. 73).

(K) Switch Area Zoom/Drag to Move

Switch between Area Zoom and Drag to Move functions for dragging in the video display area (P. 69).

(L)

Pan/Tilt/Zoom

If you enable this button (make it purple), the pan/tilt/zoom sliders are displayed on the screen to perform

operations (P. 70).

The pan slider is displayed on the bottom of the screen, the tilt slider on the left edge of the screen, and the

zoom slider on the right edge of the screen.*

(M) BLC (Back Light Compensation)

Turns on/off backlight compensation (P. 73).

(N) Home Position

Move the camera angle to the home position (P. 74).

(O) Obtain/Release Camera Control Privileges

Obtain and release the camera control privileges (P. 67).

(6)

Event and Input/Output Menu

Use external device output (P. 84).

(7)

Snapshot

Displays the still image displayed when the button was clicked by opening the snapshot panel (P. 79).

(8)

Memory Card Recording

Start and stop video recording to a memory card (P. 80).

(9)

Information Display

Information, warning and error messages are displayed (P. 62).

M50

R13 R12 M50

R13 M50 H652 H651

Summary of Contents for VB-R13VE








































































































































































































































































Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands

Canon VB-R13VE, Operation Manual

Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands