Canon VB-R13VE Operation Manual Download Page 53

Page: 53 / 263

amera Viewer

The authentication screen for the Viewer is displayed.

The Camera Viewer is displayed.



User Authentication

When you use the Viewer and the Setting page, an authentication screen is displayed, and you are prompted to enter

a user name and password.

If you enter the wrong user name or password, you will not be able to connect to the camera. Enter the correct user

name and password and connect to the camera.

When [Basic] > [Viewer] > [Viewer Settings] > [User Authentication] on the Setting Page is set to [Do not

authenticate], the authentication screen is not displayed when connecting the Viewer.

The administrator name and administrator password are set using the Camera Management Tool (P. 39).

Enter the administrator name and administrator password (P. 39), and click [OK].

Authentication screen for the Setting Page

Authentication screen for the Viewer

Summary of Contents for VB-R13VE








































































































































































































































































Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands

Canon VB-R13VE, Operation Manual

Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands