Canon VB-R13VE Operation Manual Download Page 126

Page: 126 / 263

126

The image file is saved in the specified location.

Opening the Image File

The panorama image is displayed.

Capture Settings

These settings will be applied at the panorama image capture start time and will revert back to their previous settings once

capture is completed.

[Exposure Lock]

The exposure for the selected position will be automatically adjusted and locked during capture.

[White Balance Lock]

The white balance for the selected position will be automatically adjusted and locked during capture.

[Focus Lock]

The focus for the selected position will be automatically adjusted and locked for the entire scene during capture.

In [Load from file], click [Exec].

In the displayed dialog box, select the image file to use and click [Open].

Summary of Contents for VB-R13VE








































































































































































































































































Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands

Canon VB-R13VE, Operation Manual

Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands