Canon VB-R13VE Operation Manual Download Page 5

Page: 5 / 263

Types of User Manuals

The following describes the different camera user manuals.



Notes

1. Any unauthorized reproduction of this guide is prohibited.

2. The contents of this guide are subject to change without any prior notice.

3. This document has been prepared with the utmost attention to accuracy. If you have any comments, however,

please contact a Canon sales representative.

4. Canon shall assume no liability for any outcome of using this product, notwithstanding items 2 and 3 above.

How to Use This Operation Guide

The assumed reading format of this operation guide is on a computer screen.



Software Screenshots

The software screenshots samples shown in this guide are for illustration only. The screenshots may differ from the

actual screens displayed.

Descriptions use Windows 8.1 for the operating system, Internet Explorer 11 for the web browser, and the VB-M50B

for sample screens.

The video size set selected for explanations is [1280 x 720 / 640 x 360 / 320 x 180]. If using a different video size set,

substitute those sizes.

User Manuals

Included User Manuals

Installation Guide

This describes precautions and procedures for installing the camera. Sections you should reference in this guide will be

marked “Installation Guide”.

Guides Included on the Setup CD-ROM

Operation Guide (This Guide)

This explains the camera initial settings, camera angle settings, camera viewer operations, settings on the Setting Page,

and troubleshooting, etc.

Mobile Camera Viewer Operation Guide

This explains details on how to use the Mobile Camera Viewer.

Appendix – Specifications

This lists the camera specifications.

Camera Management Tool User Manual

This explains details on how to use the Camera Management Tool.

Recorded Video Utility User Manual

This explains details on how to use the Recorded Video Utility.

Network Video Recording Software RM Series Administrator Manual

This explains details on how to use the RM-Lite video recording software (P. 22).

Summary of Contents for VB-R13VE








































































































































































































































































Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands

Canon VB-R13VE, Operation Manual

Search results

Summary of Contents for VB-R13VE

Reviews:

Related manuals for VB-R13VE

Brands by name

Popular brands