![background image](http://html1.mh-extra.com/html/canon/sx50-realis-sxga-lcos-projector/sx50-realis-sxga-lcos-projector_command-reference-manual_4206910049.webp)
Commands
PMM
Mode
Control Setting
Reference
Function
Power management
Parameter
ID
Parameter
Meaning
OFF
OFF
STANDBY
Standby mode
EXIT
Exit mode
The RANGE command can be used to obtain the parameter range that can be set at that time.
Response
An 'i:OK' is returned after setting is successful.
Description
This sets Power Management mode.
(1) This command is identical to the Power management mode function in the System settings menu.
(2) The Power Management function is disabled when the SX50 is in Remote mode even if Power management
mode is set to Exit mode or Standby mode.
(It is enabled in Local mode only.)
(3)
The GET command can be used to retrieve the current Power Management mode.
Example
Setting
> PMM=STANDBY
This sets the Power Management mode to “Standby” mode.
< i:OK
Reference
> GET PMM or ?PMM
This retrieves the Power Management mode.
<
g:PMM=EXIT
Obtain settable parameters
> RANGE PMM
< r:PMM=I,OFF,STANDBY,EXIT
※
Commands are indicated by “>”, and responses are indicated by “<”
Supported Command States
Power supply
Input
Mode
OFF
ON
PM
D-RGB
A-RGB1 A-RGB2
Comp
Video
S-Video
None
Remote
Local
×
○
×
○
○
○
○
○
○
○
○
×
※
If a state is not supported, “INVALID_MODE” or “NOT_POWER_SUPPLIED” is returned with the Err response.
※
When the power supply state is in the process of switching, an “i:BUSY” reply may be sent.